This design is available ‘by the metre’ up to 10m long, you’ll receive a continuous length of vinyl, for example if you need 1m x 6m choose qty 6
Self-adhesive vinyl floor is 400 micron thick making it ideal for floors and covering flat wall tiles. The surface needs to be smooth, clean and not embossed for the adhesive to bond correctly.
The PVC has a slight textured surface and is easily cleaned using regular household cleaners. If it’s applied to wet areas, use silicone sealant to stop water getting under the vinyl, along all edges and joins.
The vinyl can be cut to size using a utility knife or scissors, butt the vinyl together DO NOT overlap, leave to bond for at least 24 hours before cleaning.
Once bonded, this vinyl can be wiped clean and vacuumed over without damage, the surface layer will protect the design.
Ideal for kitchens, bathrooms, en-suites, cloakrooms, utility room etc
Each PVC tile is 30.5cm square
Thickness 400 ± 10 µm
Apply to clean hard flat floor & wall surfaces
Ideal surfaces to apply to :- smooth flat tiles, wood flooring or any smooth hard surface (note laminate is a floating floor, so may not be suitable)
If installing over concrete or wood, a latex primer is necessary for a secure application
DO NOT apply over concrete with excessive moisture or alkalinity
Surfaces not recommended :- uneven surfaces eg. floor-boards, concrete, lino, carpet or radiant heated floors
Simple to cut using a utility knife
No mess, grout or dust
No tradesmen required
Repositionable during application
Remove backing paper
Allow 24 hours before cleaning after application
Resistant to humidity in bathrooms
Warmer underfoot than ceramic or porcelain tile
Product is well protected and delivered in a strong tube to avoid damage during transit