**MULTI-BUY OPTION AVAILABLE WITH THIS DESIGN** choose PACK OF 10, 20, 30, 40 or 50 for money off!
Self-adhesive vinyl floor tiles are an easy DIY solution for covering floors, can be used directly on top of flat tiles or any hard surface. Theres no need to grout or use extra adhesive (unless required), simply peel back the backing paper & stick!
Once bonded, these tiles can be wiped clean and vacuumed over without damage, the surface layer will protect the design.
These tiles are not meant for the wall, but if you decide to use them as a splash-back please use extra adhesive.
Suitable for all rooms.
Please follow our How to Apply guide for best application method.
Savings on multiple packs, choose qty required
Each PVC tile is 30.48cm square
Apply over any flat hard clean surface
If installing over concrete or wood, a latex primer is necessary for a secure application
DO NOT apply over concrete with excessive moisture or alkalinity
Simple to cut using a utility knife
No mess, grout or dust
No tradesmen required
Repositionable during application
Remove backing paper
Rotate next tile to find best pattern match, you may find a light variation in design match from tile to tile. The variation should not affect the overall look of your flooring
Ideal surfaces to apply to :- smooth flat tiles, laminate flooring, wood flooring,
Surfaces not recommended :- uneven surfaces eg. floor-boards, concrete, lino, carpet or radiant heated floors
If your surface is not completely flat or the corners of your tiles are lifting, please use a spray adhesive and stick down firmly
Grout could be used for extra water protection
Allow 5 days before cleaning after application
Resistant to humidity in bathrooms
Warmer underfoot than ceramic or porcelain tile
Product is well protected and delivered in a strong box to avoid damage during transit