**Please note this design should be hung horizontal on the wall, the design runs down the roll and NOT across the width
**Each 'brick' is approx 32cm x 8.5cm
An ideal solution for covering over old tiles in your kitchen or a new splashback for your bathroom, this durable and waterproof 3D wallpaper is the perfect cover up!
The thickness of the paper and 3D texture makes it unnoticeable over flat tiles, you wont spot the grout lines PLUS another benefit is that the design runs down the roll not across, so no annoying joins or matching either!
This paper can easily be removed, simply pull the PVC surface from the support paper at the corner, the paper-layer which remains can be an ideal under-surface for another wallpaper or remove it completely.
Please follow our How to Apply guide for best application method.
Non adhesive (glue or paste required)
PVC compound & clear varnish surface
Thickness 0.60-0.90mm (depending on design)
Weight 280 360 g/m² (depending on design)
Wider width than standard wallpaper
3D effect
Realistic printing & designs
Suitable for wet areas when sealed
Seal all joins & edges using clear silicone sealant
Dry at room temperature
Durable
Washable
Use normal mild liquid household cleaners, wash off with clean water
Ideal splash-back over flat tiles
Glue required over tiles or normal wallpaper paste on walls (check pack instructions)
Avoid direct heat eg. gas hob, acetone & solvents
Recommend fireproof glass over wallpaper if applied in hob area
Product is well protected and delivered in a strong postal tube or box to avoid damage during transit
CART: