25.4cm x 25.4cm SMOKED GLASS 3D epoxy tile stickers (NH2362)
Give your splashbacks an instant tiled look without the hassle of tiling, using these 3D tile stickers to transform your kitchen or bathroom decor. These tile stickers are practical too, resistant to humidity and made of eco-friendly materials with anti-fungal, anti-mould, antibacterial and are formaldehyde free.
Make sure the surface is smooth, solid, dry and thoroughly clean before applying. The sheets overlap each other to avoid water/dirt from entering any gaps. The stickers can be cut around sockets very easily with scissors. Seal any edges and joins using clear silicone sealant if using in wet areas. Leave to dry for 24 hours before cleaning at room temperature.
Apply to smooth flat ceramic tiles, painted walls, hardboard, plywood, shower walls (if edges are sealed). Avoid uneven surfaces or unfinished walls eg. raised tiles or stone, wood panelling, bare plaster and damp walls that are untreated. If your walls are freshly painted, wait 3 weeks before applying.
Use a hairdryer to soften the adhesive, pull back a corner and remove.
Wipe clean with a regular household cleaner.
Peace of mind
Product is well protected and delivered in a strong postal tube or box to avoid damage during transit.
- Spray lightly with water on the surface to help the sticker slide into position (if required, usually not necessary on painted walls)
- Apply at room temperature (approx. 70F)
- Don’t forget to remove the protective film on the front!
- Seal all joins and edges using clear silicone sealant to make it water-tight
- Avoid direct heat eg. gas hob, but the stickers are heat resistant to 50C
- Follow our How to Apply guide for best application method