dc fix MATT LIGHT GREY sticky back plastic vinyl wrap film (1 to 15m long)
Select the width and length you require from the dropdown list below. We will send you a continuous length of vinyl.
dc fix plain sticky back plastic is available in either gloss or matt finish, a popular choice for updating doors, on a budget. This kitchen vinyl wrap can completely change the look of your room, cover plinths and appliances for a more coordinated look.
dc fix is our preferred brand of vinyl film due to its 5* rating for adhesion, opacity, lightfastness, shrinkage and durability. The water based low tack adhesive allows it to be repositioned during application.
Quick and easy to apply to clean, smooth flat surfaces. Simply remove the backing paper little by little and smooth into place, moving the smoother side to side to eliminate air bubbles. If you make a mistake, peel back and start again. The film is heat resistant to 75C so OK for hot cups and plates but NOT hot pans. Always keep at least 12 inches away from naked flames.
Sticky back plastic is a non-permanent DIY solution for updating surfaces in the home. Perfect for tenants and landlords looking for a quick, easy and budget-friendly way of updating kitchen doors or rejuvenating old worktops. It’s also perfect for upcycling items of furniture. The film is fully removable – use a hairdryer to soften the adhesive first and warm soapy water to remove any remaining residue.
Wipe clean with a regular household cleaner. Wipe up spillages that may stain straight away (eg curry). Always use chopping boards for cutting and worktop savers for hot pans. If you do damage the surface, don’t worry, just cut out the damaged section and replace with a new piece of film, ensuring any joins are overlapped slightly!
Peace of mind
Product is well protected and delivered in a strong postal tube or box to avoid damage during transit.
- We recommend using a dc fix application kit containing a scalpel and smoothing tool to make the job easier
- Use the handy grid on the backing paper as a cutting guide
- Use a sealant around sinks and hobs
- Spray a little water on smooth surfaces like glass & appliances
- A hairdryer can be used on curved surfaces to make the vinyl more pliable
- Follow our How to Apply guide for best application method